News

 

For Example, above Tire size P215/65R15 89H Means

• The "P" stands for "P-Metric" or "Passenger". This means that it is a North American tire sizing designation. European tires typically don't have the "P" attached to the size. Tires with higher ply ratings will generally start with "LT" which stands for "Light Truck". This indicates the tire is an LT metric and will always have a Load Range indicated. It is important to note this for vehicles that call for LT metric tires. Never substitute a P metric tire for an LT metric tire, even if all the other dimensions are the same.
• The "215" is the width of a tire, also known as the "section width". This is the width of the tire in millimeters at its widest point from sidewall to sidewall when mounted on the recommended rim width. The actual tire width can vary depending on the rim width it is mounted on.
• The "65"is known as the Aspect Ratio. It is calculated by dividing the section height by the section width and multiplying by 100. (In this example, the sidewall will be 65% of 215)
• The "R" stands for Radial, meaning it has a radial construction. Radial tires have ply cords that extend to the beads and are laid at 90 degrees to the centerline of the tread, the carcass being stabilized by a circumferential belt. Other possibilities include "B" for belted construction and "D" for diagonal construction. This means the ply cords extend to the beads and are laid at alternate angles less than 90 degrees to the centerline of the tread.
• The "15" stands for the diameter of the wheel in inches. This is the exact size that this tire will fit. There are some older rims called "TRX" which are metric measurements like 390. You CAN NOT mix TRX rims with regular tires or vise-versa.
• The "89" is the load index
• The "H" is the speed rating.

 

Schedule Appointment